中文

EN 

русский

Shanxi jindingtai metals co.,LTD
ICP备0047289号      Powered by 300.cn

Company news

Company news

Industry news

Industry news

What is important to note when using variable speed FAG schaeffler bearings? ​
What is important to note when using variable speed FAG schaeffler bearings? ​

What is important to note when using variable speed FAG schaeffler bearings? ​

Release time:
2019-02-15
Abstract:
What is important to note when using variable speed FAG schaeffler bearings? 1, the first to understand the use of variable speed FAG bearing shape, as well as the size of the bearing connection.
What problems should I pay attention to when installing the flange?
What problems should I pay attention to when installing the flange?

What problems should I pay attention to when installing the flange?

Release time:
2019-02-14
Abstract:
To ensure that installed flanges do not leak oil, what should be noted during installation? 1. The flange shall be strong enough to prevent deformation during fastening. Flange sealing surface shall be smooth and clean, and grease and rust spots shall be carefully cleaned during installation. 2, the sealing pad should have good oil resistance and aging resistance, as well as good elasticity and mechanical strength. The sealing gasket with different section and size should be selected according to the shape of the joint and installed correctly. 3, flange tightening force should be uniform, rubber pad compression should be controlled in 1/3 left.
How is the connection mode of orifice flange different from ordinary flange?
How is the connection mode of orifice flange different from ordinary flange?

How is the connection mode of orifice flange different from ordinary flange?

Release time:
2019-02-14
Abstract:
How is the connection mode of orifice flange different from ordinary flange? It is to fix two pipes, fittings or equipment respectively on a flange first, between two flanges, add flange gasket, fasten together with bolt, finished connection. Orifice flange is the connection of orifice plate (the measuring part of orifice meter) to the pipe by orifice flowmeter. The orifice plate is fixed in the middle by two flanges. The pressure point on the flange leads to the differential pressure transmitter to measure the flow.
What is the use of the flange?
What is the use of the flange?

What is the use of the flange?

Release time:
2019-02-14
Abstract:
The flange is used for positioning. For example, the cylinder has a mounting method called flange mounting. For example, a rectangular hole is placed around a rectangular parallelepiped. A large hole is in the middle and the outer diameter of the cylinder is the same. The rectangular parallelepiped is placed on the cylinder and the other can be welded. The way is fixed together, the connection between the cylinder and other things is connected by the four holes around the cuboid. This cuboid can be called blue.